Product overview · Hollyland

Hollyland Pyro 5

Pyro 5 combines a 5.5-inch field monitor with switchable wireless transmission and reception, HDMI and SDI connectivity, camera-control support and production tools.

By PixelPals Haven Editorial TeamResearch-based product overviewPublished July 17, 2026Updated July 18, 2026

Research-based product overview. PixelPals Haven has not yet measured brightness, range, latency or camera-control behavior on a production set.

Check current offer How this page was prepared

Hollyland Pyro 5 wireless production monitor

Quick take

Pyro 5 is for a camera crew or advanced creator workflow that needs wireless viewing and signal distribution. It is not a substitute for a basic creator microphone or a simple on-camera monitor.

Specifications checked 2026-07-18

Display: 5.5-inch touchscreen
Panel resolution: 1920 × 1080
Brightness: 1,500 nitsManufacturer specification.
Wireless bands: 2.4 GHz and 5 GHz
Claimed range: Up to 400 m / 1,300 ftManufacturer test conditions apply.
Claimed latency: 0.06 secondsManufacturer claim; workflow latency can include other devices.

Good fit for

Small production crews that need a monitor capable of switching between transmitter and receiver roles
HDMI or SDI camera workflows that need wireless feeds for directors, focus pullers or clients
Productions that can use proxy recording, image-analysis tools, camera control or RTMP streaming

Look elsewhere when

Solo creators who only need a compact on-camera monitor without wireless transmission
Workflows that require a 4K display or 4K wireless output; the documented video formats top out at 1080p60
Buyers who have not planned power, mounting, cable type and supported camera control

Verify before buying

Confirm camera-control compatibility for the exact camera body and cable path
Check whether the workflow needs one unit or multiple Pyro transmitters and receivers
Plan NP-F or DC power, mounting and weather protection for the shooting day
Treat the 400 m range and 0.06-second latency as manufacturer claims tied to test conditions

Published specifications

What Hollyland documents.

The figures below are manufacturer specifications, not PixelPals Haven laboratory measurements.

Display5.5-inch touchscreen

Panel resolution1920 × 1080

Brightness1,500 nitsManufacturer specification.

Wireless bands2.4 GHz and 5 GHz

Claimed rangeUp to 400 m / 1,300 ftManufacturer test conditions apply.

Claimed latency0.06 secondsManufacturer claim; workflow latency can include other devices.

ConnectivityHDMI 1.4b and 3G-SDI

Documented video formatsUp to 1080p60

Unit weight568 g

DC input7–16 V

Configuration guide

Choose the kit by connection and job.

Bundle names are less useful than the receiver, cables and charging hardware actually included.

Single Pyro 5

A monitor that can be assigned as a transmitter or receiver

The unit's role is selected in the workflow; a wireless link still needs a compatible transmitter and receiver arrangement.

One transmitter to multiple receivers

A director, focus puller and other viewers sharing one camera feed

Hollyland states that one transmitter can connect to as many as four receivers without broadcast mode.

Mixed Pyro ecosystem

Crews already using compatible Pyro-series devices

Confirm cross-model compatibility, firmware and the exact features available in the planned combination.

Frequently asked questions

Before you order.

Can Pyro 5 transmit and receive?

Yes. Hollyland describes the unit as switchable between transmitter and receiver modes.

How many receivers can use one feed?

Hollyland states that one transmitter can connect with up to four receivers when broadcast mode is disabled.

Does Pyro 5 support SDI and HDMI?

The official specification lists HDMI 1.4b and 3G-SDI connectivity. Confirm the required input, output and loop-through arrangement before buying cables.

Is 0.06 seconds the latency of the complete production chain?

No. It is Hollyland's product claim for the wireless system. A camera, converters, switcher, capture device and display can add their own delay.

Sources and related reading

PixelPals Haven

Opening the next view…

Preparing the page without changing your saved work.

Hollyland Pyro 5

Pyro 5 combines a 5.5-inch field monitor with switchable wireless transmission and reception, HDMI and SDI connectivity, camera-control support and production tools.

By PixelPals Haven Editorial TeamResearch-based product overviewPublished July 17, 2026Updated July 18, 2026

Research-based product overview. PixelPals Haven has not yet measured brightness, range, latency or camera-control behavior on a production set.

Verify before buying

Confirm camera-control compatibility for the exact camera body and cable path

Check whether the workflow needs one unit or multiple Pyro transmitters and receivers

Plan NP-F or DC power, mounting and weather protection for the shooting day

Treat the 400 m range and 0.06-second latency as manufacturer claims tied to test conditions

Before you order.

Can Pyro 5 transmit and receive?

Yes. Hollyland describes the unit as switchable between transmitter and receiver modes.

How many receivers can use one feed?

Hollyland states that one transmitter can connect with up to four receivers when broadcast mode is disabled.

Does Pyro 5 support SDI and HDMI?

The official specification lists HDMI 1.4b and 3G-SDI connectivity. Confirm the required input, output and loop-through arrangement before buying cables.

Is 0.06 seconds the latency of the complete production chain?

No. It is Hollyland's product claim for the wireless system. A camera, converters, switcher, capture device and display can add their own delay.